A helmet is the one piece of riding gear worth spending properly on. A good one that fits is much safer than a famous one that does not. These are the checks that matter.
1. Look for a safety standard mark
A real helmet carries a label sewn inside and/or a mark on the shell. Common ones:
- ECE 22.06 (United Nations regulation, current version, used in Europe and many other countries).
- DOT (United States).
- Snell, a voluntary racing-oriented standard.
- A national mark, for example the BIS/ISI mark in India, SNI in Indonesia, SIRIM in Malaysia or the TIS mark in Thailand. Many countries require their own mark on helmets sold there.
A helmet with no label, or only a sticker that says "DOT" with no maker or batch information, is a warning sign. Check your own country's rule: some places only allow helmets with the local mark.
2. Fit is everything
- Measure your head around the widest part, just above the eyebrows, with a soft tape, and compare with the maker's size chart.
- The helmet should be snug all round, with no pressure points. When you shake your head with the strap fastened, the helmet and your skin should move together.
- Cheek pads should press the cheeks lightly. A helmet that feels a little tight in the shop usually settles in after some hours.
- You should not be able to roll the helmet off forwards when the strap is done up. Try this in front of the seller.
3. Choose the type
| Type | Good for | Watch out for |
|---|---|---|
| Full-face | Highways, rain, any long ride | Heat in hot weather: choose one with good vents |
| Modular (flip-up) | Riders who talk or stop often | Heavier; check the chin bar is certified in the closed position |
| Open-face (3/4) | Short city trips | No chin protection |
| Half helmet | Not advised for regular riding | Covers only the top of the head |
4. Small details that matter
- A visor that is clear, scratch-free and fits the shell well. A tinted or scratched visor is dangerous at dusk. Avoid riding at night with a dark visor.
- Ventilation and a removable, washable liner make a helmet last.
- A double-D ring or ratchet strap is secure. Quick-release buckles are convenient only if they are tested and certified.
- Weight: a lighter helmet is less tiring on a long ride.
5. When to replace it
- After any hard hit, even if it looks fine. The inside foam can be crushed without a visible mark.
- Around five years from the date on the label, or earlier if the foam or the strap is worn. Heat, sweat and cleaning chemicals age a helmet.
- Never buy a used one if you do not know its history.
Quick checklist
- Label and standard mark inside, matching your country's rule.
- Measured size, snug fit, no pressure points.
- Does not roll off with the strap done up.
- Clear visor, working vents, secure strap.
- A date on the label, and no earlier hit.
Always use a helmet properly strapped for the rider and for the pillion passenger, on every ride.
Follow Road Connects